Search
Browse Categories

8600 1/8 DIN Temperature/Process Control with Heater Break Alarm

West 1/8 DIN Temperature/Process Control, Universal Input, Self Tuning, Heater Break Alarm.

<< Previous in Temperature/Process Next in Temperature/Process >>
8600 Series 1/8 DIN PID Control with Heater Break-out Alarm
Price:
(Including Options)
Item Number: N8601
N8601/Z2100/00

Product Options

* denotes required field

Input*
Out #1 (Heat)*
Out #2 ( Cool/ALM 2)*
Out #3 (ALM 1 or Retransmit)*
Options*
Power Supply*
Notes & Configuration Info
Notes500 characters remaining
ALL CONFIGURATIONS 1-3 WEEKS
The 8600 is an advanced 1/8 DIN PID temperature control that includes heater current monitoring & alarm.

8600 1/8 DIN PID Control with Heater Break
  • Heater Break Alarm
  • Auto or Manual Tuning
  • Heat/Cool Operation Option
  • Alarms Options
  • Amperage Display
  • ASCII or Modbus Comms Options
  • Configuration via PC Option
Features
Control Types - Full PID with Pre-tune, Self-tune, RaPID fuzzy logic, Manual Tuning, or On-Off control. Heat only or heat & cool.
Soft Start Allows the output to cycle during the process start-up phase.
Auto/Manual - Selectable from front panel with bumpless transfer.
Output Configuration - Up to 4 possible, for control (Heat & Cool),  Alarms or (1) retransmit of Process Value or Setpoint.
Alarm Types - Heater Break, Process high, process low, SP deviation, band.
Heater Break Alarm Current Low or Current High (In absolute current of % of nominal current)
Human Interface - 4 button operation, dual 4 digit 10mm & 8mm high LED displays with  Red Upper/Green Lower displays plus (3) Status LED's.
Manual or PC Configuration - Off-line configuration from serial port to dedicated config socket (comms option not required).

Input
Thermocouple - J, K, R, S, T, B, L & N Scalable within selected range.
RTD - 3 Wire PT100, 50ohm per lead maximum (balanced). Scalable within selected range.
Impedance - >10Mohm for Thermocouple and mV ranges
Accuracy - +/- 0.25% of input range +/- 1 LSD (T/C CJC better than 0.7°C).
Sampling - 4 per second, 14 bit resolution approximately.
Sensor Break Detection - <2 secs (except zero based DC ranges), control O/P's turn off, high alarms activate for T/C low alarms activate for RTD
Heater Current 0-50mA secondary from external current transformer.  Display can be scaled up to 100 amps.  Current transformers available separately

Outputs & Options
Control & Alarm Relays - Contacts SPDT 2 Amp resistive at 240V AC, >500,000 operations.
Control SSR Outputs - Drive capability >10V DC in 500 ohm min
Solid State (Triac) Outputs - 0.01 to 1 Amp AC 20 to 280V, 47 to 63Hz.
Retransmit DC Outputs - 0-20/4-20mA into 500ohm max, 0-10/0-5V into 500ohm min. Accuracy typically +/- 0.25%.
Communications - 2 Wire RS485, 1200 to 9600 Baud, Modbus or West ASCII
Dual Setpoint Option using volt free or TTL input. Hold = -0.6 to 0.8V or contact open, Run = 2-24V or contact close.

Operating & Environmental
Temperature & RH - 0 to 55°C (-20 to 80°C storage), 20% to 95%RH non-condensing.
Power Supply - 90-264Vac 50/60Hz (standard); 4VA ; 20-55Vac 50/60Hz, 22 to 65VDC (option)  & 22-65Vdc (option) 4W.
Front Panel Protection - IEC IP66 (Behind panel protection is IP20).
Standards - CE, UL & ULc. recognized.
 

Additional Information

 

Related Products

N9610-A25
N9610-A25, 25 Amp Current Transformer for 6600 Series control
Price: $46.00
N9610-A25, 25 Amp Current Transformer for 6600 Series control
Current Transformer for 6600, 25A, 6600 series Control
N9610-A50
N9610-A50, 50 Amp Current Transformer for 6600 Series control
Price: $47.00
N9610-A50, 50 Amp Current Transformer for 6600 Series control
Current Transformer for 6600, 50A, 6600 series Control
N9610-A100
N9610-A100, 100 Amp Current Transformer for 6600 Series control
Price: $57.00
N9610-A100, 100 Amp Current Transformer for 6600 Series control
Current Transformer for 6600, 100A, 6600 series Control
8100 PLUS 1/8 DIN Temperature/Process Control
Priced From: $495.00
8100 PLUS 1/8 DIN Temperature/Process Control
West 1/8 DIN Temperature/Process Control, Universal Input, Self Tuning (Choose options below).
Shopping Cart
Your cart is empty.
 
 
 
 
ISE, Inc.
10100 Royalton Rd.
Cleveland, OH 44133
 
Tel:  (440) 237-3200
Fax: (440) 237-1744
 
 
 
Toledo Area Office:
 
Maumee, OH 43537

Tel:  (419) 893-3330
Fax: (419) 893-2151