|
|
eCal 1/8 DIN Controller
West eCAL 1/8 DIN General Purpose Temperature Control
|
Price:
(Including Options)
Item Number: eCAL E8C
E8C0-RR-002
Product Options
* denotes required field
Output # 1 & Output #2*
Options*
Power Supply*
Display Color*
|
|
Most Configurations In Stock for Immediate Shipment
|
|
|
General Purpose PID Controller
- Jumperless Configuration
- Auto or Manual Tuning
- Up to Three Outputs
- Basic Ramp/Dwell
- Modbus Comms Options
- Depth Behind Panel only 70 mm
|
|
UNIVERSAL INPUT
|
|
Thermocouple 0.1% of full range, 1LSD ( 1°C for Thermocouple CJC).
Calibration: BS4937, NBS125 & IEC584.
PT100 Calibration: 0.1% of full range, 1LSD.
BS1904 & DIN43760 (0.00385ohm/ohm/°C).
DC Calibration: 0.1% of full range, 1LSD.
Sampling Rate: 4 per second. Impedance: >10Mohm resistive, except DC mA (5ohm) and V (47kohm).
Sensor Break Detection: Thermocouple, RTD, 4 to 20 mA, 2 to 10V and 1 to 5V ranges only. (Control outputs turn off.)
Isolation: Isolated from all outputs (except SSR driver) by at least BASIC isolation. Universal input must not be connected to operator accessible circuits if relay outputs are connected to a hazardous voltage source. Supplementary insulation or input grounding would then be required. Isolated from Mains Power Input by Reinforced Safety Isolation.
|
|
OUTPUTS
|
|
|
Output 1, 2 and 3
Available as SPST relay or SSR Driver. Output 3 is available as not fitted, SPDT relay, SSR Driver, DC Linear or RS485 variant.
RELAY 1 or 2
Contacts: Single pole single throw (SPST); 2A resistive at 120/240VAC. Lifetime: >300,000 operations at rated voltage/current. Isolation: Basic Isolation from universal input and SSR outputs.
RELAY 3 (OPTION)
Contacts: Single pole double throw (SPDT); 2A resistive at 120/240VAC. Lifetime: >500,000 operations at rated voltage/current. Isolation: Reinforced Isolation from universal input and SSR outputs.
SSR Driver 1, 2 or 3 (OPTION)
Drive Capability: SSR drive voltage >10V into 500ohm min. Isolation: Not isolated from universal input or other SSR driver outputs.
DC LINEAR OUTPUT 3 (OPTION)
Resolution: 8 bits in 250mS (10 bits in 1s typical, >10 bits in >1s typical).
Isolation: Basic safety isolation from Universal input and SSR. Reinforced safety isolation to Mains and Relay Circuits.
SERIAL COMMUNICATIONS (OPTION)
Physical: RS485, at 1200, 2400, 4800, 9600, 19200 or 38400 bps. Protocols: Modbus RTU. Isolation: Basic safety isolation from Universal input and SSR. Reinforced safety isolation to Mains and Relay Circuits.
|
|
General
|
|
|
OPERATING CONDITIONS (FOR INDOOR USE)
Ambient Temperature: 0°C to 55°C (Operating), –20°C to 80°C (Storage). Relative Humidity: 20% to 95% non-condensing. Supply Voltage and 100 to 240VAC 10%, 50/60Hz, 7.5VA
Power: (for mains powered versions), or 20 to 48VAC 50/60Hz 7.5VA or 22 to 65VDC 5W (for low voltage versions).
ENVIRONMENTAL
Standards: CE, (UL, ULC subject to approval) EMI: Complies with EN61326 (Susceptibility & Emissions). Safety Considerations: Complies with EN61010-1 & UL3121.
Pollution Degree 2, Installation Category II. Front Panel Sealing: To IP66 (IP20 behind the panel).
PHYSICAL
Front Bezel Size: 1/8 Din = 48 x 96 mm Depth Behind Panel: 70mm with sealing gasket fitted. Weight: 0.21kg maximum.
|
Additional InformationClick Here to Download Product Literature |
West 1/16 DIN Temperature/Process Control, Universal Input, Self Tuning (Choose options below).
|
West eCAL 1/16 DIN General Purpose Temperature Control
|
West 1/8 DIN Temperature/Process Control, Universal Input, Self Tuning (Choose options below).
|
West 1/4 DIN Temperature/Process Control, Universal Input, Self Tuning (Choose options below).
|
West 1/16 DIN High/Low Limit Control, Universal Input, Latching Output (Choose options below).
| |
|
ISE, Inc.
10100 Royalton Rd.
Cleveland, OH 44133
Tel: (440) 237-3200
Fax: (440) 237-1744
Toledo Area Office:
Maumee, OH 43537
Tel: (419) 893-3330
Fax: (419) 893-2151
|
|